Random good picture Not show

1. Analyzed interface contact resistance rule from affecting factor cure.

2. The contact resistance is difficult to measure.

3. Contact resistance of the pressure contact structure is investigated.

4. As a rule, the values of contact resistance in static state are used to judge the state of electrical contact. The research of dynamic contact resistance on contact is not lucubrated .

5. A model of contact resistance for a microswitch is presented.

6. Tailor - made dynamic contact resistance of gold hit the brake trigger switch, a permanent warranty.

7. Low Resistance Measurement Applications: Contact resistance, superconductor resistance measurements and resistivity measurements of conductive materials.

8. We measured the resistance and the contact resistance of the pentacene by using such method.

9. Failure usually occurs when the contact resistance exceeds the end of life value.

10. Thermal contact resistance and size effects are important factor for affecting effective thermal conductivity.

11. The results show that metal surface contact resistance decreases with the increment of pressure.

12. A new model of thermal contact resistance based on the statistic characteristic of roughness profile is proposed in this paper.

13. In this dissertation, we chose the thermal contact resistance between CPU and the Cooling as the object to experiment and research.

14. First of all, we analyzed the heat transfer process thermal contact resistance has great effects.

15. A special shape of collector is designed in order to reduce contact resistance and non-uniformity of the current; as a result the total current density in the device is increased.

16. The contacts voltage of counterpart contacts in the close course of electromagnetic relay is observed and recorded in its failure tests using dynamic contact resistance measurement system.

17. It has been shown that all three tests have caused the ohmic contact resistance to increase at the end of the tests, which leads to the failure of the contact.

18. The check is in the series of coil and four-way reversing valve control relay contact resistance increases, the bad, the contacts the voltage reduced.

19. The thermal interface material provided by the invention has the characteristics of low thermal contact resistance and high heat-conducting efficiency.

20. The product is manufactured copper, conductive performance and low contact resistance, complete specifications, welcomed by users.

21. The results showed that the expanded volume of EG was an important factor that influenced the volume resistance and contact resistance of modified composite plates.

22. In this paper the composition of the dark-brown layer is analysed with AES and ESCA and the specific contact resistance has also been measured.

23. According to the experiment results, the formula used to calculate the thermal contact resistance was adjusted.

24. This average reading removes some of the effect of contact resistance.

25. Also shown in the model are the coil - to - contact resistance and capacitance.

25. Wish you can benefit from our online sentence dictionary and make progress day by day!

26. It is stressed that enhancing the effective thermal conductivity of the adsorber and decreasing the contact resistance are key technologies in this system.

27. The invention employs a compression joint mode, thereby ensuring sufficient contact area and reducing contact resistance. The leader joint has simple structure and convenient operation.

28. For most applications, the micro - ohmmeter or DMM is sufficient for contact resistance measurements.

29. The contact voltage-drop of counterpart contacts in the closing course of electromagnetism relay is observed and recorded in its failure test using dynamic contact resistance measurement system.

30. In this paper, the contact reliability of low-capacity contact is introduced. Moreover, a testing system for dynamic contact resistance on low-capacity contact is described in detailed.